I know you are not going to believe me. Because frankly, I find it unbelievable.
I would not have believed it if the new repair guy you sent had not shown it to me.
Look at the picture below. Specifically the area circled in red.
If you look closely you will see that the two yellow wires are folded back and then spliced together with electrical tape.
What USED to be there was a safety device which cuts off the gas if it detects the flames being blown back. The new repair man said that this can happen if a strong breeze blows down the chimney.
The repair man at “Home Sweet Home Mechanical” removed the safety device and spliced the connectors together with electrical tape.
About 6 inches from the spliced wires is the gas leak (shown by the red tape). This is because he did not install the gas regulator correctly. You can see it is pointing out when it should be vertical. (the cover didn't even fit over the furnace)
That’s a great set up if you want to burn someone’s house down or kill them in their sleep.
If this was winter, we might be dead by now. The fire would have been inevitable if we were using the furnace.
hvac w red.jpg
Comment