Our new ( but 100year old) house uses cast iron radiators for heat. I have never had them before and am not sure how to even work them. Remember I am a Florida girl- I can tell you about AC but not about needing to use heat in September!!
The boiler/furnace is less than a year old. It is connected to a digital thermostat. I turned it on for the first time a day or so ago. I set it to 68 while the house temp was reading 65. They turned on, clanged a lot and heated things up. I have noticed they have come on once or twice after that, but really the temp in the house has been hovering around 68.
About 30 minutes ago I turned the thermostat up to 70 and the house temp reads 67. Nothing has happened, as in no heat. DH is out of town and I dont know how to make these babies put out. It sort of seems like they have a mind of their own.
Help!
The boiler/furnace is less than a year old. It is connected to a digital thermostat. I turned it on for the first time a day or so ago. I set it to 68 while the house temp was reading 65. They turned on, clanged a lot and heated things up. I have noticed they have come on once or twice after that, but really the temp in the house has been hovering around 68.
About 30 minutes ago I turned the thermostat up to 70 and the house temp reads 67. Nothing has happened, as in no heat. DH is out of town and I dont know how to make these babies put out. It sort of seems like they have a mind of their own.
Help!
Comment